40W BSI-POWER Series
Ultra High Efficiency Step Down DC-DC Converters/BSI 40Watt Series
Ultra High Efficiency (95%), MinimumSize Step-Down DC-DC Converter |
Input : 5V , 12V
Input : 12V |
Output: 3.3V(1.0V- 3.3V)
Output: 5.0V(5.0V- 6.0V) |
|
 |
|
- Input Voltage Range 4.5V-13.6V
- Output Voltage Range 1.0V-3.3V
5V-6V
- Latest Technology, Synchronous
Rectification Circuit
- Efficiency 93%-95%
- Heat Sink Not Required
- Adjustable Output Voltage
- Non-lsolated Type Converter
- Short Circuit, Over-Current Protection
- No Electrolytic Capacitor, No Tantalum Capacitor
- Minimum Size
- Remote ON/OFF Control
· MTBF 900,000Hrs
- Operating Temp. Range
-10°C to +70°C
（Temp. derating required）
- Higt Reliability, High Performance
- 40W+40W=80W
Parallel Operation Possible
(Application note available)
|
Models
BSI-mini Series |
Input V
Vdc |
Output V
Vdc |
Output I
A |
Input Reg
%(typ) |
Load Reg
%(typ) |
Noise
mVpp(typ) |
Efficiency
%(typ) |
| BSI-3.3S12R0F |
4.5 -13.6 |
3.3
(1.0-3.3) |
0-12 *1 |
10 |
8 |
40 |
93 |
| BSI-5.0S8R0F |
8-13.6 |
5.0
(5.0-6.0) |
0-8 *1 |
60 |
95 |
| Note 1: The output voltage inside the ( ) indicates the adjistable range. |
| Note 2: External capacitors are required. |
| *1 Depending on conditions, air flow is required. |
| <Outline> |
|
| - BSI-3.3S12R0F / BSI-5.0S8R0F |
|
 |
 |
Dimensions: mm
Weight: 13g typ
Tolerance when nothing specified: ±0.5
External is non-coated. |
|
|
-Note!
This catalogue is outline of the products. When desinging,
be sure to refer to the date sheets. |
|
|
__<Standard Connection Circuit Diagram>
|
- Extenal Capacitor
C1: 68µF(ESR=34m OHM oe less)×2PCA or more *2 (Recommended: OS-CON)
*2 BSI-5.0S8R0F:
1pce more
C2 ( Vout=3.3V): 220µF ( ESR=28m ohm or less)
× 2pcs or more (Recommended: OS-CON)
C2 ( Vout=5.0V): 150µF ( ESR=30m ohm or less) × 1pcs or more (Recommended: OS-CON)
C2 ( Vout<1.7V): 330µF ( ESR=25m ohm or
less) × 3pcs or more (Recommended: OS-CON)
- ON/OFF Control
ON/OFF control is controlled by opening and between 1 pin ( ON/OFF) and 2 pin ( S.GND) .
Output ON = Open ( Max. 6V occurs at 1pin)
Output OFF = Short ( 0-0.5V 500µA max.)
- Additional Capacitor
The putput Voltage is adjustable by connecting a resistor
beween 11pin (V.ADj1) and 12pin (V.ADJ2).
When beween 11and 12pin is open, the follwing rating
voltage is output.
BSI-3.3S12R0F=3.3V±4%
BSI-5.0S8R0F=5.0V±4%
- Remote Sensing
9pin(+Vs), 6pin(-Vs) are remote sensing pins. Be
sure to wire without making loops. |
|
|
|
|
|
* Lead-free pin have been corresponded serially since January, 2004 |
|
