| - Ultra small size |
| - High Efficiency (86% ~ 93%) |
| - Original MCM-IC adopted |
| - MTBF 1mil. Hours |
| - Low cost |
| - Built-in Over-Current Protection |
| - Built-in Over-Heat Protection |
| - Easy-to-use SIP, DIP type |
| - Output Voltage changeable |
| - Non-Isolated Converter |
| - Heat sink not required |
| - Operating Temp. -10ºC~ +70ºC |
| _(Temp. derating required) |
| - Long Life, High Reliability |
NOTES!
This is a product outline.
Please refer to the catalogue, when designing. |
Models
BSA Series |
Input V
Vdc |
Output V
Vdc |
Output I
A |
Input Reg
%(typ) |
Load Reg
%(typ) |
Noise
mVpp(typ) |
Efficiency
%(typ) |
| BSA05-2.5S1R2 |
+4.75 ~ 6 |
+2.5
(+1.5 ~ 3.3) |
0 ~ 1.2 |
1.5 |
1 |
50 |
91 |
| BSA05-2.5S1R2-D |
| BSA12-3.3S1R2 |
+8 ~ 18 |
+3.3
(+3 ~ 5) |
0 ~ 1.2 |
1.5 |
1 |
50 |
89 |
| BSA12-3.3S1R2-D |
| BSA24-3.3S1R2 |
+18 ~ 36 |
+3.3
(+3 ~ 5) |
0 ~ 1.2 |
1.5 |
1 |
50 |
86 |
| BSA24-3.3S1R2-D |
| BSA24-12S0R6 |
+18 ~ 36 |
+12
(+9 ~ 12) |
0 ~ 0.55 |
1.5 |
1 |
100 |
93 |
| BSA24-12S0R6-D |
Note1: DIP type is described with "-D"
at the end.
Note2: Ripple noise figure is when capacitor
is added.
Note3: Output voltage within (_ ) is describing the changeable range.
|
| BSA 5Watt__SIP Type |
 |
|
| BSA 5Watt__DIP Type |
 |
_
_Use it in the same way as three terminals
regulator!
__And easily make a stabilized power supply.
- When the 5pin (V.adj) is disconnected to
the resistor, the standard voltage described
in the table
_above still will be output. In this case
a resistor is not
required.
- External capacitor is required. Please
refer to the specific catalogue.
- Please go through application of the specific
catalogue when designing. |
|
|
High Efficiency, Ultra Small Size, Step-Down
DC-DC Converter
