| -Ultra Small size |
| - High Efficiency (84% ~ 94%) |
| - Original MCM-IC adopted |
| - MTBF 1mi.l hours |
| - Low cost |
| - Simple structure |
| - Built-in Over-Heat protection |
| - Built-in Over-Current protection |
| - Easy-to-use SIP, DIP type |
| - Output voltage changeable |
| - Non-Isolated Converter |
| - Heat sink not required |
| - Operating Temp. -10ºC ~ +70ºC |
| (Temp. derating required) |
| - Long life, High reliability |
NOTES!
This is a product outline.
Please refer to the catalogue, when designing.
|
Models
BSA Series |
Input V
Vdc |
Output V
Vdc |
Output I
A |
Input Reg
%(typ) |
Load Reg
%(typ) |
Noise
mVpp(typ) |
Efficiency
%(typ) |
| BSA03-1.8S6R0 |
3.3
(+3 ~ 5.5) |
+1.8
(+1~3.3) |
0~6 |
1 |
1 |
30 |
86 |
| BSA03-1.8S6R0-D |
| BSA24-3.3S2R2 |
24
(+9 ~ 36) |
+3.3
(+3~5) |
0~1.8
(0~2.2) |
1.5 |
1 |
50 |
82 |
| BSA24-3.3S2R2-D |
| BSA24-12S1R0 |
24
+(18 ~ 36) |
+12
(+9~12) |
0~0.75
(0~1) |
1.5 |
1 |
100 |
91 |
| BSA24-12S1R0-D |
| Note1: DIP type is described with "-D"
at the end. |
| Note2: Ripple noise figure is when capacitor
is added. |
| Note3: Output current within (__ ) is the figure when air-cooled is compelled. |
| Note4: Output voltage within (__) is describing the changeable range. |
|
| BSA 15Wattt__SIP Type (BSA03) |
|
 |
 |
|
|
| BSA 15Watt__DIP Type (BSA03) |
|
|
|
|
|
| BSA 15Wattt__SIP Type (BSA24) |
|
 |
 |
|
|
| BSA 15Watt__DIP Type (BSA24) |
|
 |
|
__Use it in the same way as three terminals
regulator!
__And easily make a stabilized power supply.
__- When the 12pin (V.adj) is disconnected
to the resistor, the standard voltage described
in the table
__ above still will be output. In this case
a resistor is not required.
__- External capacitor is required. Please
refer to the specific catalogue.
__- Please go through application of the specific
catalogue when designing.
|
|
|
High Efficiency Ultra Small Step-Down DC-DC
Converter
