Bellnix Co., LTD

BSK Series is 12V input ultra small, SMD, high efficiency
non-isolated type step down DC-DC converter developed
for distributed feed.
It has got a wide adjustable output voltage range from
0.8 - 6.6V and can operate under the ambient temperature
of up to 85 degree with little derating.
Input Voltage: 5.6-14V, Output Voltage: 0.8-6.6V, Output
Current: 4A, 8A
Catalog

BDA Series has a feature of PMBus telecommunication
and can change and monitor output voltage and sequence
status while the converter is in operation.
Input Voltage: 4.5-5.5V, Output Voltage: 0.8-2.5V, Output
Current: 12A
Catalog
Data sheet

Pin Compartible with former BSS series. 3W and 30W both
ready! Wide input voltage, wide output volatge range.
3W type: Input 7 to 36V / Output 3.3V to 24V, 0.6A.
30W type: Input 16.4 to 36V / Output 9 to 15V, 2.5A
Catalog
Data sheet 30W type

BST12M series is a small, thin, high-efficiency, low noise non-
isolated step down 12V input DC-DC converter developed for
distributed powering. Output voltage is widely adjustable from
0.7525V to 5.5V.
Design improvement has been made and can be operated by
minimum derating up to 85℃.
Catalog
Data sheet BST04M BST12M

BST12L series is a small, thin, high-efficiency, low noise non-
isolated step down 12V input DC-DC converter developed for
distributed powering. Output voltage is widely adjustable from
0.7525V to 5.5V.
Design improvement has been made and can be operated by
minimum derating up to 85℃.
Catalog
Data sheet BST04L BST12L

BSV-1.8S9R5HE is Low price, High speed Load response
POL converter suited for driving latest FPGA or DSP, digital IC
such as ASSP. As many converters are shifting to Low voltage
and Big current, despite the extreme change of load, it can
supply stable current and do not have to rely on the condenser.
Input voltage: 3.0-5.5V, Output Voltage: 0.8-1.8V, Output
Current: 9.5A
Catalog
Data sheet

Digital POL Converter(Built-in PMBus telecommunication
function)
Digital POL Converter which provide PMBus telecommunication
function. It can be used like analogue power supply. To adjust
output, choose either by instructing from host microcomputer
via PMBus or using output resistor as analogue POL.
Input Voltage: 4.75-13.2V, Output Voltage: 0.69-3.3V, Output
Current: 10A
Catalog